Machine Embroidery Part 3
After placing the t-shirt in the hoop and connecting the hoop to the embroidery arm on my sewing machine, I simply have to tell the machine which design I am doing and it reads that design from the d-card that I’ve inserted into it. I thread the 1st color of the design through the sewing machine and then push the “fix” button. This will tell the machine to baste a box on the fabric that basically outlines where the design will be.
Basting is very helpful when embroidering a fabric that is laying on top of the hoop. It help keep the fabric in position. After the basting is done, I press start and the machine begins stitching the design itself. The machine will do all of the work, I only have to change the thread when it is a color change and make sure there is plenty of thread in the bobbin.
This photo was taken after the first design was stitched, the candy castle.












posted on March 11th, 2008 at 8:15 pm
posted on March 11th, 2008 at 8:49 pm
posted on March 11th, 2008 at 11:01 pm
posted on March 12th, 2008 at 1:27 am
posted on March 12th, 2008 at 8:01 am
posted on March 12th, 2008 at 8:18 am
posted on March 12th, 2008 at 8:19 am
posted on March 12th, 2008 at 5:55 pm
posted on March 17th, 2008 at 5:36 pm
posted on March 17th, 2008 at 7:25 pm